The maintenance of the Car of the Injection December 24, 2007
Posted by yort2 in Tips.add a comment
Had your car stalled in the highway? Do not happen !
Sometimes the car stalls was caused because the injection system worked abnormal.
To avoid like that, the service of the routine of the injection system every time 5.000 km must be carried out. Beside the maintenance that was carried out in the injection system will determine the achievement of the car personally. Along with was the component that must be serviced so that your car does not stall in the road :
- The petrol filter :
This Component was gotten in machine space and was made from metal. The dirty petrol filter better be cleaned with help of the wind had the pressure high. However if too dirty better the new substitute. Because if being allowed to damage could happen that hindered to the petrol station that was marked by the sounding rustling voice emergence unstable. - The Air filter :
Fungsinya to refine the waste and dust from air, so as to give the air opportunity to enter more to space burnt. The hindering of air will cause the burning to be imperfect and to waste the fuel. Because of functioning as the filter, of course the air filter must be clean from the waste. - Throttle Body :
This component was also susceptible to the waste. As a result the attraction became more unresponsive. If the waste already many in the part throttle position censor, then could cause the round of the machine to become crippled in the situation stationer. The Throttle Body cleanliness was connected with the cleanliness of the filter from air that was inhaled to space burnt. - Nozel Injector :
The Hole nosel that was small his measurement could also be closed the waste. So as the petrol syringe was imperfect and his debit to decreased. This resulted in the round of the machine became crippled and his attraction to decreased - The adjustment Co :
Carried out the repeated adjustment in the system of petrol supplies, air and injection. used the grating Co to know the process of the burning in the machine whether being efficient or not yet. Ideally thought Co under 1 %.
